Dimensional Information
millimeters
inches
Form No. 80-920-001 Revised 2014-03-05 www.mico.com
MICO, Inc.
1911 Lee Boulevard
North Mankato, MN U.S.A. 56003-2507
Tel: +1 507 625 6426 Fax: +1 507 625 3212
MICO is a trademark and registered trademark of MICO, Inc. MICO is registered in the U.S. Patent and Trademark Ofce as well as in Australia, Canada, Indonesia, Japan, Peoples Republic of China, South Korea, and the European Community.
Filler Cap Design: Polypropolyne
ller cap with bafe and breather.
Reservoir Construction: Fluid reservoir
is made of a high strength, re retardant
translucent polyallomer.
Reservoir Construction: Rugged
anodized aluminum.
Adaptable Fittings Available:
a. 9/16-18UNF-2A, which accepts a
37° SAE 3/8 inch tube nut or will
thread into a #6 SAE o-ring boss.
b. 1/4-18NPTF (internal).
Diaphragm Material: Diaphragms are
available in compounds for use with
DOT 3, 4, 5, and 5.1 brake uid, mineral
base hydraulic oil, and most phosphate
ester uids.
This document is intended to provide general information about MICO Products. MICO, Inc. has attempted to present accurate information about MICO Products in its cata-
logs, brochures, and other printed materials. MICO, Inc. is not responsible for errors, inaccuracies, or inconsistencies that may exist in any catalog, brochure, or other printed
materials or any damages arising from or related to reliance on information in them. Materials and specications for MICO Products set forth in catalogs, brochures, and other
printed materials are subject to change without notice or obligation. Refer to www.mico.com for the most recent versions of our literature. If you have any questions concerning
MICO Products, please contact MICO, Inc. All MICO Products and service are sold and provided subject to the MICO Warranty at www.mico.com in effect on the date of sale
or supply.